The Ultimate Guide to Using GrandMA onPC with Enttec DMX USB Pro
How to Use GrandMA onPC with Enttec DMX USB Pro
Introduction
If you are looking for a reliable, flexible, and intuitive lighting control system that can handle small to medium sized events or installations with up to 4,096 parameters, you might want to consider using GrandMA onPC with Enttec DMX USB Pro. In this article, we will explain what these two products are, how they work together, and how you can use them to create amazing lighting designs.
grandma on pc crack enttec
GrandMA onPC is a free software that emulates the functionality of a GrandMA console on your PC or Mac. It allows you to program and control lights using the same interface and features as the GrandMA consoles, such as grandMA2 or grandMA3. You can use GrandMA onPC for offline editing, pre-programming, live show control, backup solution, or remote control. You can also link it with other software such as GrandMA 3D, MA VPU, MA Network Switch, or PRO-Manager for visualization, video integration, network management, or device configuration.
Enttec DMX USB Pro is a device that converts USB signal into DMX signal. It allows you to output DMX signal from your PC or Mac via a USB port. It has one 5-pin XLR input and one 5-pin XLR output for connecting to your lighting fixtures. It also has an internal frame buffer for consistent DMX generation. It is compatible with many software that support DMX USB interfaces, such as GrandMA onPC.
Using GrandMA onPC with Ent Using GrandMA onPC with Enttec DMX USB Pro has many advantages, such as:
You can use a powerful and professional lighting control software for free.
You can output DMX signal from your PC or Mac without needing a dedicated console or interface.
You can use a compact and portable device that is easy to connect and configure.
You can use the same software and device for different purposes and applications.
However, there are also some challenges that you need to be aware of, such as:
You need to have a compatible PC or Mac that meets the minimum system requirements for running GrandMA onPC.
You need to have a reliable USB connection and power supply for your Enttec DMX USB Pro device.
You need to have a good understanding of the GrandMA onPC software and the Enttec DMX USB Pro device settings and features.
You need to follow the best practices and tips for using GrandMA onPC with Enttec DMX USB Pro to avoid potential issues or problems.
In the following sections, we will guide you through the steps and procedures for using GrandMA onPC with Enttec DMX USB Pro, as well as provide you with some useful tips and tricks. Let's get started!
Requirements and Setup
Before you can use GrandMA onPC with Enttec DMX USB Pro, you need to make sure that you have the following hardware and software:
Hardware
Software
A PC or Mac that meets the minimum system requirements for running GrandMA onPC. You can check the system requirements here.
The latest version of GrandMA onPC software. You can download it for free from the official website here.
An Enttec DMX USB Pro device. You can buy it from the official website here or from other online or offline retailers.
The latest version of PRO-Manager software. You can download it for free from the official website here.
A USB cable for connecting your Enttec DMX USB Pro device to your PC or Mac.
Optional: Other software that you want to use with GrandMA onPC, such as GrandMA 3D, MA VPU, MA Network Switch, etc. You can download them from the official website here.
A 5-pin XLR cable for connecting your Enttec DMX USB Pro device to your lighting fixtures.
One or more lighting fixtures that support DMX protocol.
A power supply for your Enttec DMX USB Pro device. You can use either a USB power adapter or a battery pack.
Once you have all the hardware and software ready, you can proceed to install and configure them as follows:
How to install and configure GrandMA onPC software on your PC or Mac?
Download the GrandMA onPC software from the official website here. Choose the version that matches your operating system (Windows or macOS) and your console type (grandMA2 or grandMA3).
Run the installer and follow the instructions on the screen. Accept the license agreement and choose the destination folder for the installation. You can also choose whether to create shortcuts or not.
Wait for the installation to complete. You may need to restart your computer after the installation.
Launch the GrandMA onPC software from your desktop or start menu. You will see a splash screen followed by a login screen. Enter your username and password if you have one, or create a new user account if you don't. You can also choose whether to enable offline mode or not.
Select a show file to load or create a new one. You will see the main interface of GrandMA onPC, which consists of several windows and menus. You can customize the layout and appearance of the interface according to your preferences.
To access the settings of GrandMA onPC, click on the Setup button in the top right corner of the interface. You will see a menu with several tabs, such as General, Network, DMX, Timecode, etc. You can adjust the settings for each tab according to your needs. For example, you can change the language, the console type, the network mode, the DMX output mode, the timecode source, etc.
Save your settings and show file by clicking on the Save button in the top right corner of the interface. You can also export or import your show file to or from other devices or formats.
How to connect Enttec DMX USB Pro to your PC or Mac and to your lighting fixtures?
Download the PRO-Manager software from the official website here. Choose the version that matches your operating system (Windows or macOS).
Run the installer and follow the instructions on the screen. Accept the license agreement and choose the destination folder for the installation. You can also choose whether to create shortcuts or not.
Wait for the installation to complete. You may need to restart your computer after the installation.
Launch the PRO-Manager software from your desktop or start menu. You will see a splash screen followed by a main window. You can customize the layout and appearance of the window according to your preferences.
Connect your Enttec DMX USB Pro device to your PC or Mac via a USB cable. Make sure that you have a power supply for your device, either a USB power adapter or a battery pack.
The PRO-Manager software will automatically detect your device and display its information in the window. You can see the device name, serial number, firmware version, status, etc. You can also rename your device or update its firmware if needed.
Connect your Enttec DMX USB Pro device to your lighting fixtures via a 5-pin XLR cable. Make sure that you have a DMX terminator at the end of the cable to prevent signal interference.
The PRO-Manager software will show you the DMX signal that is being sent or received by your device. You can use the software to test, monitor, or configure your device and your lighting fixtures.
How to set up GrandMA onPC to output DMX signal via Enttec DMX USB Pro?
In GrandMA onPC, go to Setup > DMX > Output Mode. Choose "DMX USB" as the output mode for your desired universe. You can also choose whether to enable RDM (Remote Device Management) or not.
In GrandMA onPC, go to Setup > DMX > Devices. Choose "Enttec DMX USB Pro" as the device type for your desired universe. You can also choose whether to enable Art-Net or sACN (Streaming ACN) protocols or not.
In GrandMA onPC, go to Setup > DMX > Patch & Fixture Schedule. Assign your lighting fixtures to your desired universe and address. You can also edit the fixture type, mode, name, group, etc.
In GrandMA onPC, go to Setup > DMX > Output View. Check if your lighting fixtures are receiving DMX signal from GrandMA onPC via Enttec DMX USB Pro. You can also use this view to test or control your lighting fixtures manually.
Programming and Controlling Lights
Now that you have set up GrandMA onPC with Enttec DMX USB Pro, you can start programming and controlling lights using GrandMA onPC interface and features. Here are some of the basic steps and procedures that you need to follow:
How to use GrandMA onPC interface and features to program and control lights?
In GrandMA onPC, go to Edit > Programmer. This is where you can create cues, chases, effects, presets, groups, macros, etc. for your lighting fixtures.
Select one or more lighting fixtures that you want to program or control by clicking on their icons in the Output View or by typing their numbers in the Command Line.
Adjust their parameters such as intensity, color, position, gobo, etc. by using the Encoder Wheels or by typing commands in the Command Line.
Store your adjustments as cues by clicking on one of the Executor Buttons or by typing commands in the Command Line. You can also assign names, numbers, times, fade modes, etc. to your cues.
Edit your cues by using the Cue List Window or by typing commands in the Command Line. You can also copy, move, delete, insert, update, etc. your cues.
Play back your cues by clicking on the same Executor Buttons or by typing commands in the Command Line. You can also adjust the playback speed, direction, mode, etc. of your cues.
Use the Fader Wing Window or the Virtual Fader Wing Window to control the intensity, speed, or master of your cues. You can also assign different functions to the faders, such as flash, solo, swap, etc.
Use the Command Wing Window or the Virtual Command Wing Window to access more buttons and encoders for programming and controlling lights. You can also assign different functions to the buttons, such as select, go, pause, back, etc.
Use the Toolbar Window or the Virtual Toolbar Window to access more menus and options for editing, storing, loading, saving, etc. your show file and settings.
Use the Help Window or the Virtual Help Window to access more information and tips for using GrandMA onPC software and features.
How to use GrandMA 3D software to visualize your lighting design?
Download the GrandMA 3D software from the official website here. Choose the version that matches your operating system (Windows or macOS) and your console type (grandMA2 or grandMA3).
Run the installer and follow the instructions on the screen. Accept the license agreement and choose the destination folder for the installation. You can also choose whether to create shortcuts or not.
Wait for the installation to complete. You may need to restart your computer after the installation.
Launch the GrandMA 3D software from your desktop or start menu. You will see a splash screen followed by a main window. You can customize the layout and appearance of the window according to your preferences.
In GrandMA 3D, go to File > New > Project. Choose a name and a location for your project file. You can also choose whether to use a template or not.
In GrandMA 3D, go to File > Import > Fixture Library. Choose a fixture library file that matches your lighting fixtures. You can download fixture library files from the official website here or from other online sources.
In GrandMA 3D, go to Edit > Fixture Properties. Assign your lighting fixtures to your desired universe and address. You can also edit their position, orientation, mode, name, group, etc.
In GrandMA 3D, go to View > Render View. Check if your lighting fixtures are displayed correctly in the 3D environment. You can also use this view to navigate, zoom, rotate, pan, etc. in the 3D space.
In GrandMA onPC, go to Setup > Network > Session. Choose "Create Session" as the session mode and enter a session name and a password if you want. You can also choose whether to enable Art-Net or sACN (Streaming ACN) protocols or not.
In GrandMA 3D, go to File > Connect > Session. Choose "Join Session" as the session mode and enter the same session name and password as in GrandMA onPC. You can also choose whether to enable Art-Net or sACN (Streaming ACN) protocols or not.
In GrandMA 3D, go to View > Render View. Check if your lighting fixtures are responding to DMX signal from GrandMA onPC via Enttec DMX USB Pro. You can also use this view to see how your lighting design looks like in real time.
How to use MA VPU software to integrate video into your lighting design?
Download the MA VPU software from the official website here. Choose the version that matches your operating system (Windows or macOS) and your console type (grandMA2 or grandMA3).
Run the installer and follow the instructions on the screen. Accept the license agreement and choose the destination folder for the installation. You can also choose whether to create shortcuts or not.
Wait for the installation to complete. You may need to restart your computer after the installation.
Launch the MA VPU software from your desktop or start menu. You will see a splash screen followed by a main window. You can customize the layout and appearance of the window according to your preferences.
In MA VPU, go to File > New > Project. Choose a name and a location for your project file. You can also choose whether to use a template or not.
In MA VPU, go to File > Import > Media Files. Choose one or more media files that you want to use in your project. You can use various formats of video, image, audio files, etc. You can also download media files from the official website here or from other online sources.
In MA VPU, go to Edit > Media Properties. Assign your media files to your desired layer and output. You can also edit their position, size, rotation, opacity, speed, loop mode, etc.
In MA VPU, go to View > Output View. Check if your media files are displayed correctly on the output screen. You can also use this view to navigate, zoom, rotate, pan, etc. in the output space.
In GrandMA onPC, go to Setup > Network > Session. Choose "Create Session" as the session mode and enter a session name and a password if you want. You can also choose whether to enable Art-Net or sACN (Streaming ACN) protocols or not.
In MA VPU, go to File > Connect > Session. Choose "Join Session" as the session mode and enter the same session name and password as in GrandMA onPC. You can also choose whether to enable Art-Net or sACN (Streaming ACN) protocols or not.
In MA VPU, go to View > Output View. Check if your media files are responding to DMX signal from GrandMA onPC via Enttec DMX USB Pro. You can also use this view to see how your video integration looks like in real time.
How to use MA Network Switch software to manage your network settings?
Download the MA Network Switch software from the official website here. Choose the version that matches your operating system (Windows or macOS) and your console type (grandMA2 or grandMA3).
Run the installer and follow the instructions on the screen. Accept the license agreement and choose the destination folder for the installation. You can also choose whether to create shortcuts or not.
Wait for the installation to complete. You may need to restart your computer after the installation.
Launch the MA Network Switch software from your desktop or start menu. You will see a splash screen followed by a main window. You can customize the layout and appearance of the window according to your preferences.
In MA Network Switch, go to File > New > Project. Choose a name and a location for your project file. You can also choose whether to use a template or not.
In MA Network Switch, go to Edit > Network Properties. Configure your network settings such as IP address, subnet mask, gateway, DNS server, etc. for your PC or Mac and for your Enttec DMX USB Pro device.
In MA Network Switch, go to View > Network View. Check if your network settings are correct and if your devices are connected and communicating properly. You can also use this view to monitor, test, or troubleshoot your network issues.
How to use PRO-Manager software to test, update, and configure your Enttec DMX USB Pro device?
Launch the PRO-Manager software from your desktop or start menu. You will see a splash screen followed by a main window. You can customize the layout and appearance of the window according to your preferences.
Connect your Enttec DMX USB Pro device to your PC or Mac via a USB cable. Make sure that you have a power supply for your device, either a USB power adapter or a battery pack.
The PRO-Manager software will automatically detect your device and display its information in the window. You can see the device name, serial number, firmware version, status, etc. You can also rename your device or update its firmware if needed.
In PRO-Manager, go to Tools > Test Tools. Use this tool to test the DMX input and output of your device. You can send or receive DMX signal from or to other devices or software.
In PRO-Manager, go to Tools > RDM Tools. Use this tool to enable or disable RDM (Remote Device Management) on your device. You can also use this tool to discover, identify, configure or monitor other RDM-enabled devices on your network.
In PRO-Manager, go to Tools > Art-Net Tools. Use this tool to enable or disable Art-Net on your device. You can also use this tool to configure the Art-Net settings such as subnet, universe, port, etc. on your device.
In PRO-Manager, go to Tools > sACN Tools. Use this tool to enable or disable sACN (Streaming ACN) on your device. You can also use this tool to configure the sACN settings such as universe, priority, source name, etc. on your device.
Tips and Tricks
In this section, we will share with you some tips and tricks for using GrandMA onPC with Enttec DMX USB Pro. These tips and tricks will help you optimize your performance and avoid common issues or problems.
How to optimize your GrandMA onPC performance and avoid common issues?
Make sure that your PC or Mac meets the minimum system requirements for running GrandMA onPC. You can check the system requirements here.
Make sure that you have the latest version of GrandMA onPC software and Enttec DMX USB Pro firmware. You can download them from the official websites here and here.
Make sure that you have a reliable USB connection and power supply for your Enttec DMX USB Pro device. Avoid using USB hubs, extension cables, or low-quality cables. Use a USB power adapter or a battery pack instead of relying on your PC or Mac power.
Make sure that you have a stable network connection and settings for your GrandMA onPC and Enttec DMX USB Pro device.